← Back to NK Marketing
Skip to content
OrvantIndustrial Systems

ORVANT Industrial Systems · Since 1988

Engineeringwhat industrydepends on.

Pumps, valves, drives, automation and safety systems — specified by application engineers, built to standard and supported in 62 countries.

Explore productsRequest a quote
  • ISO 9001:2015
  • ISO 14001
  • ISO 45001
  • API 610 / 6D
  • ATEX · IECEx
  • CE · UKCA

[01]3D Equipment Explorer

Inspect the HX-400 down to the last bolt.

Rotate, zoom and explode a live engineering model of our flagship API 610 process pump. Select any component to read its specification — the same data our application engineers quote from.

● Live model · HX-400 · Rev 07
AZ 000° EL 00°

Hold Ctrl / ⌘ and scroll to zoom

[02]Product range

Nine categories.
One accountable supplier.

24,000 stocked and engineered products, selected and specified by application engineers who know the duty, the standard and the plant it has to survive in.

Full catalogue

[03]From melt to plant

Every part, traceable from raw stock to running duty.

01Traceable to the melt

Raw Material

Every critical part starts as certified forged stock, heat-number tracked from mill certificate to finished pump.

Alloy
Duplex 2205
Cert
EN 10204 3.1
PREN
≥ 35

[04]Industries served

Ten industries.
Zero tolerance for downtime.

From 1,400 °C mill environments to validated sterile suites, our engineers specify for the duty, the hazard and the audit — not the catalogue page.

  • 01

    Manufacturing

    Discrete and process lines running three shifts.

    • Line automation
    • Drives & motors
    • Spares programmes
  • 02

    Steel

    Descaling, cooling and handling at mill temperatures.

    • High-pressure descaling
    • Roll-cooling pumps
    • Heavy bearings
  • 03

    Automotive

    Body, paint and powertrain at takt time.

    • Robotic handling
    • Paint-shop pumps
    • Machine safety
  • 04

    Chemical

    Corrosive, toxic and ATEX-zoned duty.

    • Sealless pumps
    • Lined valves
    • Zone 1 motors
  • 05

    Cement

    Abrasive dust, kiln heat and 24/7 availability.

    • Kiln drives
    • ID fan bearings
    • Bulk conveying
  • 06

    Power

    Cooling water, boiler feed and balance-of-plant.

    • Cooling-water pumps
    • Isolation valves
    • Condition monitoring
  • 07

    Oil & Gas

    Upstream to refinery, onshore and offshore.

    • API 610 pumps
    • API 6D valves
    • Produced water
  • 08

    Pharmaceutical

    Sterile, validated and fully documented.

    • WFI loops
    • Hygienic valves
    • GAMP 5 automation
  • 09

    Food Processing

    Hygienic design with fast changeovers.

    • CIP systems
    • Sanitary pumps
    • Washdown motors
  • 10

    Infrastructure

    Water, wastewater, tunnels and transit.

    • Lift stations
    • Ventilation drives
    • Large-bore valves

[05]Solutions

Outcomes,
not just equipment.

Our engineering teams own the result: measured before, engineered, installed and verified after — with figures you can take to your finance director.

  • −41%unplanned downtime

    Predictive programmes built on vibration, thermal and oil analysis, with critical spares held against your asset register.

    • Criticality analysis
    • SENTRY condition monitoring
    • Vendor-managed spares
    • Shutdown support
    Discuss this solution
  • −32%kWh per m³ pumped

    Measured system audits of pumps, fans and compressors, then IE5 motor and variable-speed retrofits with verified savings.

    • ISO 50001 audits
    • Pump system optimisation
    • IE5 + VFD retrofits
    • Measured & verified savings
    Discuss this solution
  • +27%line throughput

    Robotic cells, PLC / SCADA integration and virtual commissioning on a digital twin before a single bolt is turned.

    • Robotic handling cells
    • PLC / SCADA
    • Virtual commissioning
    • OT cybersecurity
    Discuss this solution
  • PL eto ISO 13849-1

    Machine-safety assessments, guarding, light curtains and lock-out programmes engineered, installed and validated.

    • Risk assessment
    • Safety PLC design
    • Guarding & light curtains
    • LOTO programmes
    Discuss this solution
  • +18 ptsOEE improvement

    OEE instrumentation, bottleneck engineering and line balancing that turns stoppage data into capacity.

    • OEE instrumentation
    • Bottleneck studies
    • Changeover (SMED)
    • Line balancing
    Discuss this solution
  • −35%handling cost per tonne

    Conveyors, hoists, AGVs and bulk handling sized for your throughput, dust and duty cycle.

    • Belt & roller conveyors
    • AGV / AMR fleets
    • Overhead hoists
    • Bulk solids handling
    Discuss this solution

[06]Technical trust

Measured in decades, proven in plants.

Every figure below is backed by a project file, a test certificate or an engineer you can speak to.

Years of experience01
Engineering since 1988
Products02
Stocked & engineered SKUs
Industries served03
Heavy process to hygienic
Projects delivered04
Specified, built, commissioned
Countries served05
Six regional hubs
Technical experts06
Application & field engineers

Certified management systems & product approvals

  • ISO 9001:2015
  • ISO 14001
  • ISO 45001
  • API 610 / 6D
  • ATEX · IECEx
  • CE · UKCA

[07]Project showcase

3,400 projects.
Here are six.

Project sheet · ORV-PRJ-2025-011 · Rev A

TK-200 WATERP-201AP-201BMACCUMULATORPT210FT211DESCALING HDRVFD × 4230 bar

Client industry

Steel

Integrated steel producer · Western Europe

Equipment

  • — 4 × HX-M multistage pumps
  • — 4 × 1.2 MW IE4 motors + VFDs
  • — VX-250 isolation valves
  • — SENTRY S3 sensors

Challenge

Descaling pumps at 230 bar were failing every nine months, each failure halting the hot-strip mill for up to 14 hours.

Solution

Replaced the fixed-speed train with variable-speed multistage pumps, accumulator control and SENTRY vibration monitoring on every bearing.

Result

MTBF, up from 9
30 mo
MTBF, up from 9
pumping energy
−24%
pumping energy
unplanned stops in year one
0
unplanned stops in year one
Start a similar project

[08]Request a quote

Tell us the duty.
We’ll engineer the answer.

  • 24-hour technical responseFrom an application engineer — never a call centre.
  • Engineered, not just pricedDuty review, selection and sizing come with every quote.
  • Full documentationDatasheets, GA drawings and curves with each proposal.
  • Confidential by defaultMutual NDA on request before you share drawings.

Prefer to talk?

rfq@orvant.example/+1 555 0140

RFQ · Technical enquiry

All fields required except files